|
Do it yourself
| |||
| ||||
Replacement of Cabin Ventilation Fan Motor
Model: Citroen Xsara Picasso
MK 1
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
The motor for the cabin ventilation fan is located behind the centre tunnel, and to extract it from its housing, you need to access it from the driver's side, creating the right amount of working space. Start by disconnecting the universal joint of the steering column from the pinion of the steering box, taking care not to let the steering wheel rotate freely once disconnected (this could damage the airbag spiral). Then, remove the section of the dashboard directly under the steering wheel and dismantle the connector located on the right side. At this point, disconnect the two plugs from the motor and rotate it anti-clockwise to release and extract it. Proceed in reverse for the installation of the new one.
Updated on 16 February 2026 by ScegliAuto
Related tutorials
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Before you begin, sit in the front passenger seat of your Citroen Xsara Picasso. Start by removing the glove compartment by unscrewing the relevant b…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
How to replace the cabin fan resistor on a Xsara Picasso? Get a screwdriver or a cordless drill, open the glove compartment and unscrew the securing …
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Before you can start, sit in the front passenger seat. Begin by unscrewing the screws that secure the glove compartment to the dashboard, then remove…
Other guides you may be interested in
|
How to Replace the Starter Motor on an Opel Corsa?
In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.174
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
