Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stalk Switch on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Steering wheel

How do you remove the stalk switch on the Xsara? Disconnect the battery cables located in the engine bay, then unscrew the screws on the sides of the steering wheel. Remove all the cover plastics from behind the steering wheel. Once the plastics are removed, unscrew the securing screws on the left or right stalk switch. Pull towards you the rounded piece positioned above the stalk switch, taking care not to damage it. Prepare to fit the new piece. First, connect the power to the new piece, tighten the securing screws, and then reattach all the cover plastics behind the steering wheel.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Indicator Stalk on Citroen Xsara Picasso
How to Remove the Indicator Stalk on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to remove the indicator stalk on a Citroen Xsara Picasso? Follow these steps for disassembly: before removing the steering wheel, disconnect the …
Where are the fuses located on a Citroën Xsara Picasso?
Where are the fuses located on a Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) On the Citroën Xsara Picasso, all fuses are divided between the designated fuse boxes installed in the vehicle: there are two, one located inside the…
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before starting, lift the rear of your Citroen Xsara Picasso. Begin by loosening and removing the bolts that secure the rear wheel to the hub, then r…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos