|
Do it yourself
| |||
| ||||
How to Change the Battery on a Citroen Xsara Picasso
Model: Citroen Xsara Picasso
MK 1
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
On some models of the Citroen Xsara Picasso, the battery is located under the driver's seat rather than in the engine bay, so you need to lift the seat to access it. Here's how to do it: remove the headrest by pressing the latch on the left side; this is essential as you will need to push the seat all the way up. Then push it all the way forward to see the position of the battery. Now, from the plastic bar behind the seat, you will see some springs: you need to open them so that the seat is pushed upwards, allowing access to the battery, which is covered by a plastic cover that you can remove. Then disconnect the negative terminal, followed by the positive terminal, and remove the battery for replacement. Finally, reverse the process to put everything back in place.
Posted on 5 February 2026 by ScegliAuto
Related tutorials
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Replace the vehicle's power battery? Remove the power battery in a Citroen Xsara Picasso. Open the car door and lift the driver's seat; the battery i…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscr…
Citroen Xsara Picasso
(1999-2012 /
MK 1)
Do you want to remove the battery from the Citroen Xsara Picasso? Here’s how to take out the battery from the Citroen. Open the car door and lift the…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |