Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do if the Citroen Jumper indicates a water temperature anomaly

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Pump

See other generations:
Video tutorial

In this video, we see a problem with a Citroen Jumper MK3 version, where the temperature sensor indicated the water temperature exceeding 100°C. The issue was not so much with the timing belt itself - which also drives the water pump - but rather with the pump that was damaged.

It was necessary to remove the timing belt, which, although not damaged, has already covered a good number of miles, so it is advisable to replace it since it has been removed; we will replace it along with the water pump, which is irreparably gone.

Therefore, if you encounter a similar problem, know that the responsibility lies with the water pump.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a 2021 Citroen Jumper
How to Reset the Tyre Warning Light on a 2021 Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) The 2021 Citroen Jumper, the vehicle for transporting goods shown in the uploaded video, is equipped with a tyre anomaly warning light that activates…
Where is the OBD port located in the Citroen Jumper?
Where is the OBD port located in the Citroen Jumper?
Citroen Jumper (2014-2024 / MK 3) In this new guide, we will discover together where the OBD port of your Citroen Jumper is located and what you need to do to access it. First of all,…
Where to Find the OBD2 Port on a Citroen Jumper
Where to Find the OBD2 Port on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you are curious about where to find the OBD2 port on your Citroen Jumper, simply read the following steps carefully and apply them. First, open th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos