Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the cabin air filter of Citroen C3.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Cabin air filter
Operation: How to replace the cabin air filter of Citroen C3.

To correctly replace the cabin filter in your Citroen C3 second series (year 2009-2016) it only takes a few minutes. All you have to do is read the following steps and put them into practice. First of all, make sure the car is turned off, then lift the front hood and remove the panel located at the top of the engine compartment. Once this simple operation is completed, locate the air filter located just below and replace it with a new one. Finally, correctly reassemble the previously removed panel and you're done.


Posted on 2 May 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Where is the Citroen C3 cabin air filter located? Read Answer
    • C3 2009-2016 - Where is the cabin filter of the Citroen C3 II? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos