Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb in a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Interior dome light bulb

In this brief and simple guide, you will learn how to remove and replace the interior light bulb in a Citroen C4 by following the instructions below. First, get inside the vehicle and carefully pry the sides of the light unit to detach it from the roof, using something thin. Next, remove the small bulb as shown in the video. Now, install the new interior light bulb with the same fitting; check its operation and reattach the light unit!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the headlining or interior roof lining of the Citroen C4
Replacing the headlining or interior roof lining of the Citroen C4
Citroen C4 (2004-2010 / MK 1) In this guide, you will discover the necessary instructions to remove and replace the headlining or interior roof lining of the Citroen C4. First, ge…
How to Change the Rear Light Bulb on a Citroen C4
How to Change the Rear Light Bulb on a Citroen C4
Citroen C4 (2010-2018 / MK 2) To replace the rear light bulb on a Citroen C4, open the boot and locate the two fixing screws of the light cluster on the inner edge. Unscrew them c…
How do you replace the fog light bulb of the Citroën C4?
How do you replace the fog light bulb of the Citroën C4?
Citroen C4 (2010-2018 / MK 2) In order to replace the fog light bulb of the Citroën C4, you need to use an object to pry off the trim panel around the corresponding fog light. At …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos