Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator on a Citroën C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Checks and maintenance

To replace the window regulator on a Citroën C3, loosen the screws securing the door panel to detach it by unscrewing the fixing screws. Underneath, you will locate the window regulator mechanism: secure the glass at the top and disconnect it from the mechanism, which can be removed from its housing by unscrewing the fixing screws and disconnecting the power cables. You can then extract the old mechanism from its housing and replace it with a new spare part; after replacement, refit the door panel and check that everything functions correctly.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) In this video, learn how to replace a flat tyre on a Citroen C3. Open the boot and take the wheel removal kit which includes: jack, jack handle, scre…
Citroen C3 (2002-2009 / FC, FN) In this video, we see how to replace the electric window regulator of our Citroen C3 version I: we must remove the inner trim panel, starting with th…
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to remove the rear window on a Citroen C3. For this operation, you will need a T25 Torx key and a set of screwdriv…

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos