Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Replace the Key Shell of the Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Key

This guide provides instructions on how to dismantle and replace the key shell of the Citroen C1 by following these simple steps. First, take your remote control and start by unscrewing the small fixing screw located on the casing; then, open the remote control into two parts as shown in the video. Now, remove the key, the battery, and the electronic board, transferring everything to the new key shell; remember to install everything in sequence, ensuring that the central locking buttons function correctly!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on Citroen C1
How to Replace the Key Battery on Citroen C1
Citroen C1 (2005-2014 / MK 1) How to disassemble the key to replace the battery? Disassemble the key of the Citroen C1 and see how to replace the dead battery. Take the remote key…
How to replace the battery of the Citroen C1 2021 key
How to replace the battery of the Citroen C1 2021 key
Citroen C1 (2014-2022 / MK 2) To replace the battery inside the key of your Citroen C1 second series (year 2021), you only need a new battery (model CR 2032) and a small flathead …
How to Remove the Rear Headlamp of the Citroen C1?
How to Remove the Rear Headlamp of the Citroen C1?
Citroen C1 (2005-2014 / MK 1) Removing the rear headlamp of the Citroen C1 to replace the bulbs or the headlamp itself is very simple. Follow these steps in this tutorial. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos