Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Aircross
    4. : Where is the OBD port located on the 2018 Citroen C3 Aircross?

Citroen C3 Aircross - Video tutorial

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Dashboard
Operation: Where is the OBD port located on the 2018 Citroen C3 Aircross?

If you own a 2018 Citroen C3 Aircross and are wondering where the OBD port is located, then all you have to do is read the following guide carefully and follow the few simple steps described. First of all, reach the driver's seat and for safety reasons, make sure the car is parked on a flat surface and completely turned off. Then, shift your attention to the lower part of the dashboard and locate the OBD port on the right side. Once found, you can finally connect any compatible diagnostic tool to it.


Posted on 1 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos