Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Discs on the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Brake rotors

To replace the front brake pads and discs, lift the vehicle and remove the front wheel; then unscrew the retaining bolts of the brake caliper to remove it and extract the old pads; detach the caliper bracket and the fixing screw of the disc on the hub; brush the seating and clean the disc of protective oil before installing it; refit the caliper bracket, retract the piston using a suitable clamp, and insert the new pads while remounting the caliper; pay particular attention during the initial braking.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How do you replace the radiator of the Citroën Xsara Picasso?
How do you replace the radiator of the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In order to replace the radiator of the Citroën Xsara Picasso, you will need to open the hood so that you can identify the components inside the engi…
Replace the Front Shock Absorbers on Citroen Xsara Picasso
Replace the Front Shock Absorbers on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, you will learn how to dismantle and replace the front shock absorbers on a Citroen Xsara Picasso. First, open the bonnet of y…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos