Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse Box on a Citroen C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Fuse box

If you are looking for the fuse box inside your first-generation Citroen C3 (2002-2009), simply follow these steps. First, park your Citroen C3 on a flat surface and then turn it off completely. Once done, lift the front bonnet and disconnect both battery terminals for safety reasons. Finally, go inside the cabin and remove the panel located under the steering wheel. Finally, locate the fuses and proceed with any necessary maintenance or replacement.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse for the engine fan of the Citroen C3 located?
Where is the fuse for the engine fan of the Citroen C3 located?
Citroen C3 (2009-2016 / SC) Inside the Citroen C3 there are two fuse boxes. The first fuse box is located inside the passenger compartment behind the glove box. The second fuse …
Where is the ECU fuse located in the Citroen C3?
Where is the ECU fuse located in the Citroen C3?
Citroen C3 (2009-2016 / SC) The fuse of the ECU or engine control unit, on a 2015 Citroen C3 car, is located inside the fuse box in the front hood. The fuse in question is a gre…
Fuse Box of a Citroen C3
Fuse Box of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This guide shows the locations of the two fuse boxes in our Citroen C3, first and second generation models. The first box is located in the engine co…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2009-2016 - Where is the petrol pump relay located in the Citroen C3? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos