Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Programme and Reset the Gearbox on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Warning light – error code

This guide will show you the necessary steps to programme or reset the gearbox control unit on the Citroen C4 Picasso, as well as other models from the manufacturer. First, get inside the vehicle and connect your diagnostic tool; then select the make and model of the vehicle, as shown in the video. At this point, perform the diagnosis and guided programming of the gearbox, executing a reset of the control unit if necessary; with the specific software, you can check the correct functioning of the transmission.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to programme the key for the Citroën C4 Picasso?
How to programme the key for the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To programme the key for the Citroën C4 Picasso, you first need to dismantle the device so that the coding chip inside can be extracted. Once the chi…
How to replace the clutch on the Citroën C4 Picasso?
How to replace the clutch on the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To replace the clutch on the Citroën C4 Picasso, lift the car so that the front wheels can be completely removed: once these are removed, proceed to …
How to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso
How to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today we will see the instructions that will allow us to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso. In order to p…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does the engine failure warning light in the instrument cluster of a Citroen C4 Picasso mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos