Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C6
    4. : How to remove the front bumper of the Citroen C6

Citroen C6 - Video tutorial

Model: Citroen C6 MK 1 - Years 2005-2012
Part: Front bumper
Operation: How to remove the front bumper of the Citroen C6

Today's guide will show us the steps on how to disassemble and replace the front bumper of the Citroen C6. First, we open the engine hood and start removing the plastic clips that we find on the top part. Then, we unscrew the fastening screws of the plastic protective cover located under the bumper, unscrewing the fastening screws as shown in the video. At this point, we remove the screws located on both sides of the front wheel arches, thus releasing the bumper on the sides. We gently remove the front bumper, applying the reverse process for reassembly!


Posted on 12 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos