Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlamp on a Citroen Jumper Van?

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Tail light

In this tutorial, see how to remove the rear headlamp on a Citroen Jumper van, a very simple operation, for example, when replacing a bulb or the headlamp itself. First, ensure the key is not in the ignition, then open the tailgate and remove the panel at the back of the headlamp in question. Next, locate the securing nuts, unscrew them using a spanner, and pry the headlamp away from the bodywork. At this point, disconnect the connector and replace the damaged element.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the cabin filter located in the Citroen Jumper van and how to remove it?
Where is the cabin filter located in the Citroen Jumper van and how to remove it?
Citroen Jumper (2006-2014 / MK 2) In this video, you can see where the cabin filter is located in the Citroen Jumper van and how to remove it, allowing you to clean or replace it dire…
Where is the Battery Located in the Citroen Jumper Van?
Where is the Battery Located in the Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this video, we can see where the battery is located in the Citroen Jumper van and how to proceed if we need to replace it. As shown, it is not pos…
What is the Fuse Diagram for the Citroen Jumper Van?
What is the Fuse Diagram for the Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) If a device in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the diagrams f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos