Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Citroen Jumper?

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Headlight bulb

In this tutorial, you can see how to replace the front headlight bulbs in the Citroen Jumper, a very simple and quick operation. First, ensure that the key is not inserted, then open the engine bonnet, locate the metal clip at the back of the headlight in question, push it inwards, and remove the large plastic cap. If you need more space, you can remove the headlight itself by unscrewing the two retaining bolts with a 10 mm socket. Once you have access to the bulb, disconnect the power connector, replace it, and reassemble everything.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ignition barrel in a Citroen Jumper van?
How to replace the ignition barrel in a Citroen Jumper van?
Citroen Jumper (1994-2006 / MK 1) As shown in this tutorial, replacing the ignition barrel in a Citroen Jumper van is a very simple and quick operation. First, go inside the cabin and…
How to Set the Time in a Citroen Jumper Van?
How to Set the Time in a Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) In this tutorial, you will learn how to set the time in a Citroen Jumper van, a very simple and quick operation to perform, for example, after a flat…
How to Replace the Dipped Beam Bulbs in a Citroen Jumper Van?
How to Replace the Dipped Beam Bulbs in a Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, you will see how to replace the dipped beam bulbs in a Citroen Jumper van, a very simple operation that requires removing the headl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos