Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in a Citroen Jumper Van?

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Headlight bulb

In this tutorial, you will see how to replace the dipped beam bulbs in a Citroen Jumper van, a very simple operation that requires removing the headlamp itself. First, ensure the key is not inserted, then open the bonnet and unscrew the two fixing bolts indicated with a Torx spanner. Next, disconnect the power connector, lift the headlamp, and separate it from the bodywork. At this point, you can extract the faulty bulb by turning it slightly anti-clockwise, insert the replacement without touching the glass with bare hands, and reassemble everything.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Citroen Jumper van?
How to replace the front headlight bulbs in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial we can see how to replace the front headlight bulbs in the Citroen Jumper van, an extremely simple and quick operation. First of all…
How to replace the front headlight bulbs in the Citroen Jumper?
How to replace the front headlight bulbs in the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) In this tutorial, you can see how to replace the front headlight bulbs in the Citroen Jumper, a very simple and quick operation. First, ensure that t…
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) Inside the Citroën Jumper, all the fuses are divided into the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle there…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos