Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel to Install Speakers

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

Video tutorial

Today, with the help of this short video tutorial, you will learn how to remove the door panel to install new speakers for the car radio on a Citroen C3 Picasso. First, use a Phillips screwdriver to remove the fixing screw located on the handle, then detach the trim using a prying tool.

Next, start removing the surrounding screws on the panel on the left and right sides using both a Phillips screwdriver and a flathead screwdriver. Then, remove the cap near the window with the help of a plastic tool and finally detach the handle.

To remove the handle, take out the fixing screws and then disconnect the electrical connector. Once the panel is removed, take out the old speaker by disconnecting the connectors and various wires as shown in the video, and insert the new one.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on a Citroen C3 Picasso?
How to Remove the Front Door Panel on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) In this tutorial, you will see how to remove the front door panel on a Citroen C3 Picasso, a very simple and quick operation. First, open the door yo…
How to Replace the Door Lock on the Citroen C3
How to Replace the Door Lock on the Citroen C3
Citroen C3 Picasso (2008-2017 / MK 1) To replace the front door lock, it is not necessary to remove the internal trim panel as the lock is held in place by a lateral screw that can be acc…
How to Check the Side Window of a Citroen C3 Picasso Door
How to Check the Side Window of a Citroen C3 Picasso Door
Citroen C3 Picasso (2008-2017 / MK 1) Is the glass in your car causing problems? In this video, see how to remove a door panel from a Citroen C3. Use a screwdriver or a plastic spatula to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos