Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Lock on the Citroen C3

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door lock

Video tutorial

To replace the front door lock, it is not necessary to remove the internal trim panel as the lock is held in place by a lateral screw that can be accessed through a specific hole drilled in the outer pillar of the door, right at the level of the lock; start by removing the cover capsule of the handle, then open the door and insert the hex key into the designated lateral hole to loosen the retaining screw of the lock just enough to remove the lock itself; then insert the new lock and tighten the screw.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to replace the bulb of the interior light of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Today we will learn how to disassemble the interior light fixture of the Citroen C3 Picasso, replacing its bulb. First, we climb into the interior an…
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
How to Replace the Water Pump on a Citroen C3 Picasso 1.4 VTi
Citroen C3 Picasso (2008-2017 / MK 1) This guide provides the main instructions for removing and replacing the water pump on a Citroen C3 Picasso 1.4 VTi. First, lift the vehicle and remo…
Replacing the Number Plate Lights on the Citroen C3 Picasso
Replacing the Number Plate Lights on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Here are the instructions on how to remove and replace the number plate bulbs on the Citroen C3 Picasso in simple, quick steps. First, open the rear …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos