Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Door trim panel

In this video tutorial, you will learn how to remove and replace the front door panel of the Citroen C5 by following these simple and quick steps. First, open the front door and start removing the plastic cover of the opening handle and the window switch by prying on the sides with something thin. Then disconnect the electrical connector of the switch, as shown in the video. Now unscrew the fastening screws located on the sides of the panel to detach and remove it; finally, disconnect the cable of the opening handle!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on a Citroen C5
Removing the Door Panel on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Removing the door panel on a Citroen C5? Here’s how to take it off from the top of the door and how to fit it back. Remove the plastic cover that con…
Disassembly of the front door panel of the Citroen C5
Disassembly of the front door panel of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) This short and simple procedure will show us how to disassemble and replace the front door panel of the Citroen C5. First, we open the front door of …
Removing the Door Panel on Citroen C5
Removing the Door Panel on Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Remove the door panel on a Citroen C5 if it is damaged or if you need to repair the door from the inside. Remove all the plastic cover pieces above t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos