Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the Citroën Jumper?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clock

See other generations:
Video tutorial

To set the clock on the Citroën Jumper, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is on, press the MODE button repeatedly located to the left of the steering column. When the word "Hour" appears on the instrument panel, press and hold the MODE button to make the hours flash, which can then be adjusted using the arrow buttons next to MODE. Pressing it again will allow you to adjust the minutes following the same procedure.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How do you set the clock in the Citroen Jumper?
How do you set the clock in the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) The Citroen Jumper is a light commercial vehicle, also known as a van. In its instrumentation there are several pieces of information that can be con…
How do you set the clock on the Citroën Jumper?
How do you set the clock on the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) To adjust the clock that appears on the instrument panel of the Citroën Jumper, first turn on the panel by inserting the ignition key into the igniti…
How do you set the clock on the Citroën Jumper?
How do you set the clock on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The procedure for adjusting the clock on the Citroën Jumper can be done by entering the vehicle's interior and turning on the instrument panel by ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos