Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Citroen C4

Model: Citroen C4 MK 3 - Years 2020-2026
Part: Headlight bulb

If you are wondering what steps to follow to correctly replace the headlight bulb of your new Citroen C4, all you have to do is carefully read the following guide and follow the instructions. First of all, make sure the vehicle is turned off, then lift the front hood and remove the rubber cap located at the back of the headlight that needs to be replaced. At this point, remove the bulb holder and replace the faulty bulb with a new one. Finally, reassemble everything and you're done.

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Citroen C4
How to replace the front headlight bulb of the Citroen C4
Citroen C4 (2010-2018 / MK 2) If you want to replace the headlight bulb of your Citroen C4 Mk2, you need to follow these steps. First of all, open the hood and position yourself i…
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2010-2018 / MK 2) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the internal part of the corresponding headlamp. Disconnect the circula…
How to Replace the Front Headlamp Bulb on a Citroën C4
How to Replace the Front Headlamp Bulb on a Citroën C4
Citroen C4 (2004-2010 / MK 1) To replace the front headlamp bulb on a Citroën C4, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs replacing…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos