Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the tire on the Citroen C3?

Model: Citroen C3 SC - Years 2009-2016
Part: Tires

Let's talk about one of the most classic and well-known interventions in the world of cars, in fact, replacing a flat tire is something that everyone has had to do or has seen others do. The video explains the procedure that is valid for any car, so let's proceed: Turn off the engine, engage the handbrake and put the car in first gear, position the jack at a designated point on the car's floor, loosen the wheel locking bolts and then lift the aforementioned jack. Finally, remove the flat tire and install the spare wheel. It is important to remember, if you are on a public road, to signal the presence of the stationary car with a warning triangle.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of the 2004 Citroen C3?
How to Open the Bonnet of the 2004 Citroen C3?
Citroen C3 (2002-2009 / FC, FN) Note that the vehicle shown in the video is a Citroen C3 produced between 2009 and 2016, but the method for opening the front bonnet is the same as f…
Removing Third Brake Light on Citroen C3
Removing Third Brake Light on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this brief video tutorial, you will learn how to remove the third brake light on a Citroen C3. First, open the boot lid, and inside the two holes …
How do you reset the tire sensor warning light in the Citroen C3?
How do you reset the tire sensor warning light in the Citroen C3?
Citroen C3 (2016-2023 / SY, SX) The tire pressure monitoring system light, in the Citroen C3 and in any other car, turns on when there is a flat, deflated, or cut tire, or when one …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos