Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the Citroen C5 cabin heating radiator.

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Heater core

Following the steps outlined in this guide, we will see the disassembly and replacement of the heating radiator of the Citroen C5's cabin. First, we get into the car and start dismantling the dashboard, subsequently removing all its components (unscrewing all the fixing screws and disconnecting the various electrical connectors); then it will be possible to remove the heating radiator block and the ducts, as shown in the video. At this point, we remove the heating radiator from the block, following the video tutorial until the end!

Posted on 7 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on Citroen C5
How to Replace the Cabin Air Filter on Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) This guide shows how to replace the pollen filter on the Citroen C5. This operation does not require special tools. The cabin air filter is located n…
How to Remove the Cabin Air Filter on a Citroen C5
How to Remove the Cabin Air Filter on a Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Let's replace the worn pollen filter on a Citroen C5 and see how to remove it. The cabin filter is located at the bottom behind the centre tunnel. Us…
Guide to disassembling the roof sky of the Citroen C5
Guide to disassembling the roof sky of the Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) In this guide we will see the instructions that will allow us to disassemble and eventually replace the headliner or roof lining of the Citroen C5. F…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos