Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the cover of the central console of the Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Dashboard

If you need to disassemble the protective cover of the central console in your Citroen DS3 on your own, just carefully read the following guide and follow the described procedure. First, get into the car and make sure the parking brake is engaged, then turn off the car if it is still on and locate the entire cover that covers the central console. At this point, gently pull the cover until it is completely removed and the procedure is successfully completed. To install a new one, simply insert it into the appropriate slot.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the console and central tunnel of the Citroen DS3
Disassembly of the console and central tunnel of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In this guide we will see the main instructions on how to disassemble and replace the console and central tunnel of the Citroen DS3. First of all, we…
How to remove the central dashboard cover of the Citroen DS3
How to remove the central dashboard cover of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In this guide we will see the steps that will allow us to disassemble and remove the central dashboard cover and the air vents on the Citroen DS3. Fi…
How to replace the battery of the Citroen DS3 key
How to replace the battery of the Citroen DS3 key
Citroen Ds3 (2010-2019 / MK 1) To correctly complete the procedure that allows you to replace the battery located inside the key of your Citroen DS3, you must carefully read the fo…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos