Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Metallic Vibrations of the 1.6 HDi Engine in a Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see how to fix the metallic vibrations that are a common fault of the 1.6 HDi engine, also fitted in the Citroen C4: the problem is caused by the metal cover that, having a metal-on-metal seal, vibrates and produces that annoying noise.

Over time, the component can easily split in two due to the vibrations, and at that point, it must be replaced.

The price for an aluminium part is exorbitant, just under £50. It is advisable to visit a parts dealer with the part in hand, as opinions on the exact name - the only way to find it online - are not consistent, and you risk buying the wrong part. If your part has not yet broken, try tightening it a bit (not too much) or adding washers for spacing.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Citroen C4 1.6 HDI
Replacing the Timing Belt on the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today, we will see the procedure for removing and replacing the timing belt on the Citroen C4 1.6 HDI, following the instructions below. First, lift …
How to replace the clutch of the Citroën C4 1.6 HDi?
How to replace the clutch of the Citroën C4 1.6 HDi?
Citroen C4 (2010-2018 / MK 2) To replace the clutch of the Citroën C4 1.6 HDi, lift the car with a jack or ramp so that the front wheels are off the ground: these must now be comp…
Reset Service Light on a Citroen C4 1.6 HDI
Reset Service Light on a Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today, you will learn how to reset the service light for routine maintenance on a Citroen C4 first series with a 1.6 HDI engine. First, get inside th…

    Frequently Asked Questions

    • C4 2010-2018 - Why isn't the touch screen of the Citroen C4 working? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos