Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on a Citroen C4 1.6 HDI

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Service warning light

Today, you will learn how to reset the service light for routine maintenance on a Citroen C4 first series with a 1.6 HDI engine. First, get inside the car and press and hold the trip button; then turn on the ignition and wait until the countdown appears next to the maintenance key light. Once the countdown is finished, you can turn off the ignition and release the button; start the engine, and you will see that the service light has been reset!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Citroen C4 1.6 HDI
Replacement of the timing belt of the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) Today we will see the process of disassembly and replacement of the timing belt of the Citroen C4 1.6 HDI, following the instructions below. First, l…
How to replace the battery of the Citroen C4 1.6 HDI
How to replace the battery of the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) In a few simple steps, we will see the process of disassembling and replacing the battery of the Citroen C4 1.6 HDI. First, open the hood of the car …
How to replace the clutch of the Citroën C4 1.6 HDi?
How to replace the clutch of the Citroën C4 1.6 HDi?
Citroen C4 (2010-2018 / MK 2) To replace the clutch of the Citroën C4 1.6 HDi, lift the car with a jack or ramp so that the front wheels are off the ground: these must now be comp…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos