Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on the Citroen C3 SX

Model: Citroen C3 SY, SX - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

To replace one of the bulbs in the rear light of the Citroen C3, in case they burn out, open the boot lid and move to the side of the light containing the bulb to be replaced. In the lining of the boot side, you will find a small cover.

Once opened, you will see an electrical connector that needs to be disconnected and a screw. After unscrewing, you can remove the light.

Place it on a work surface, open the back, and access the plate where the bulbs are housed. Replace the burnt bulb and reassemble the plate, insert the light back into its housing, screw in the screw, reconnect the connector, and close the cover.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Replacing the Bulbs in the Rear Light of a Citroen C3
Replacing the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this guide, you will find instructions to remove and replace the bulbs in the rear light of a Citroen C3. First, open the boot lid and start remov…
How to Replace the Rear Light Bulbs on the Citroen C3
How to Replace the Rear Light Bulbs on the Citroen C3
Citroen C3 (2009-2016 / SC) Below are the instructions for removing the rear light and replacing its bulbs on the Citroen C3. First, open the boot lid and start removing the cov…
How to Remove the Rear Light of the Citroen C3
How to Remove the Rear Light of the Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today's video will show you the procedure for removing and replacing the rear light and its bulbs on the Citroen C3. First, open the boot and begin t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos