Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Dacia Sandero Stepway

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

In this video, we will see how to reset the maintenance service indicator on a Dacia Sandero. This is a very simple operation.

Enter the vehicle, put it in neutral and turn on the ignition. Within ten seconds of turning it on, press the accelerator pedal and then press the brake pedal three times.

Release the pedals simultaneously after the third brake. Finally, turn off the ignition and check the settings made.

You will see on the stereo display when the next oil change service is due. Always remember to make changes to the onboard computer while the vehicle is stationary and turned off.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to reset the service light on the Dacia Sandero Stepway?
How to reset the service light on the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) This video guide explains how to reset the service light on the Dacia Sandero Stepway. First, remember to turn on the instrument cluster. Then, follo…
How to Reset the Service Light on a Dacia Sandero Stepway 3
How to Reset the Service Light on a Dacia Sandero Stepway 3
Dacia Sandero (2021-2026 / MK 3) To correctly perform the manual reset of the service light on your Dacia Sandero Stepway third generation, simply follow these steps. First, get into…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos