Do it yourself
Frequently asked questions about cars and motorcycles

How to Check the Coolant Level on the Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see how to check the coolant level on the Dacia Sandero: open the bonnet, and you will find the coolant reservoir on the left side of the engine bay (looking at the vehicle from the front). Check that the level is between "min" and "max". If it is below the minimum or close to the minimum mark, open the cap and top up the coolant.

It is very important to top up with coolant of the same colour as that in the reservoir. Never use just water unless it is an emergency situation.

Start the engine for about a minute to circulate the fluid, and check the level again.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2021-2026 / MK 3) Here's how to check the fluid levels on a Dacia Sandero: the engine must be off for at least 30 minutes. Open the bonnet and start by checking the en…
Dacia Sandero (2021-2026 / MK 3) In this video we see how to check the engine oil on a Dacia Sandero 1.0 petrol. The YouTuber wisely suggests that the first maintenance of an engine …
Dacia Sandero (2021-2026 / MK 3) To properly check the fluid levels on your Dacia Sandero, open the bonnet and start with the engine oil level: remove the yellow dipstick and clean i…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos