Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Duster
  6. : Remove the headlight bulbs of a Dcia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Headlight bulb
Operation: Remove the headlight bulbs of a Dcia Duster

Headlight bulbs of a Dacia Duster out of order? Let's see together how to proceed with disassembly in the illustrative video. We open the hood of the engine compartment, remove the inspection caps of the headlights (rear of the headlights) with a screwdriver, remove the bulb holders from the headlight and disconnect the relative power supply terminals. We replace damaged bulbs with (equal pieces of size and voltage) new ones. After replacing the bulbs, we mount the lamp holder in the headlight housing. Finally we close the rear of the headlights with the inspection caps. We test the correct functioning of the lights.


Posted on 10 October 2023 by ScegliAuto



How to replace headlight bulbs on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to remove the headlight bulbs on a Dacia Duster: open the front hood by pulling the lever located at the bottom right of the dashboard,
How to replace the bulbs on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to replace the headlight bulbs of the Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash
Removing the headlight bulbs on a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Let's see the disassembly of the headlight bulbs on Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash

Other guides that may interest you

    Frequently Asked Questions

    • Duster 2010-2017 - How to replace the sidelight bulbs in the Dacia Duster? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos