Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag from the Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Airbag

Today we will explain the steps to remove the steering wheel airbag on a Dacia Sandero vehicle. To remove the safety system, it is important to underline that you must first disconnect the battery because it is dangerous. Once the battery is disconnected, we can proceed with the removal. To do this, we must insert the star screwdriver into the left side hole, in order to push the opening lever. Once the clips are removed, we can extract the airbag. This operation is carried out when you want to know the status of the system connector after the warning light has turned on.

Posted on 26 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag from a Dacia Sandero
How to Remove the Airbag from a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. It is advisable to disconnect the battery before performing this procedure. Start b…
How to deactivate the passenger airbag of the Dacia Sandero
How to deactivate the passenger airbag of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) Today we will explain how to deactivate the passenger airbag of the Dacia Sandero MK three model produced from 2021 to today. To deactivate the airba…
How to Deactivate the Airbag in a Dacia Sandero Stepway?
How to Deactivate the Airbag in a Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) This tutorial shows how to deactivate and reactivate the passenger airbag in a Dacia Sandero Stepway, a procedure to be performed whenever a rear-fac…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos