Do it yourself
Frequently asked questions about cars and motorcycles

Replace Damaged Fuses on Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Checks and maintenance

Replace damaged fuses located in the dedicated box on a Dacia Sandero. Open the cover and check the warning on the dashboard with the ignition on. Use a plastic lever to remove the trim located in the dashboard next to the steering wheel (left side). Then, disconnect the damaged fuses using needle-nose pliers. Once this is done, insert the new fuses into the appropriate slots in the fuse box. Finally, close the fuse inspection box with the cover, and test the correct operation of the vehicle by turning on the ignition with the appropriate key.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) The 2015 Dacia Sandero has two fuse boxes inside. The first fuse box is located inside the front hood, specifically near the battery. The second fuse…
Dacia Sandero (2008-2012 / BS) In this video we see the location of the fuse boxes of the Dacia Sandero I: the first box is located in the engine compartment, on the right side, lo…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos