Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the console and central tunnel of the Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Center console tunnel

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble the console and the central tunnel of the Dacia Sandero. First of all, we get on board the car and start by detaching and removing the gear shift boot; we pry on the plastic cover of the console to remove it, unscrewing the fixing screws that we find underneath (using a torx key or screwdriver), as shown in the video.

At this point, we remove the central console, carrying out the repair or replacement; we reassemble all the previously disassembled components, applying the reverse process!


Posted on 4 January 2025 by ScegliAuto


Related tutorials

How to Install the Armrest Storage Compartment on Dacia Sandero
How to Install the Armrest Storage Compartment on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Learn how to install the armrest storage compartment in the central tunnel trim of a Dacia Sandero. Position the armrest horizontally, then, using a …
How to Remove the Dacia Sandero Sat Nav
How to Remove the Dacia Sandero Sat Nav
Dacia Sandero (2008-2012 / BS) Want to remove the sat nav from your Dacia Sandero but not sure how? Here’s how to take out the original sat nav: Remove the stereo trim frame using …
How do you adjust the handbrake of the Dacia Sandero?
How do you adjust the handbrake of the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) It will be possible to adjust the handbrake of the Dacia Sandero by completely removing the panel covering the central tunnel: to remove this panel, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos