Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the oil service light in a Dacia Sandero Stepway?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

Resetting the oil service light is easier than you think. Get in the car, close the doors, and turn the key to the ON position without starting the engine.

Now, press and hold the trip odometer button, the one you use to reset the partial kilometers, until the display starts flashing. When you see the flashing, continue to hold it until the value resets or stops flashing.

At this point, release the button and turn off the ignition. Turn the car back on to verify that the light has disappeared.

If you can't do it the first time, try again calmly. Think it's too difficult to do it yourself? Contact an expert.


Posted on 24 March 2025 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How do you reset the Service light of the Dacia Sandero Stepway?
How do you reset the Service light of the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero Stepway, you will need to turn on the instrument panel by inserting and turning the ignition key into…
How to Reset the Service Light on a Dacia Sandero Stepway 3
How to Reset the Service Light on a Dacia Sandero Stepway 3
Dacia Sandero (2021-2026 / MK 3) To correctly perform the manual reset of the service light on your Dacia Sandero Stepway third generation, simply follow these steps. First, get into…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos