Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD2 port located in the Dacia Sandero?

Model: Dacia Sandero BS - Years 2008-2012
Part: Checks and maintenance

Knowing the location of the OBD2 port in your first generation Dacia Sandero is very important as it allows you to connect any diagnostic tool to it to analyze any errors in the ECU. In the following guide, we will explain in a simple way how to locate the OBD2 port in question. First of all, enter the passenger compartment and open the glove compartment located on the passenger side and locate the OBD2 port in the rear area of the compartment. To access it, simply remove the small plastic cover.

Posted on 18 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) To locate the OBD2 port inside your Dacia Sandero (2017 model), it only takes a few seconds. All you need to do is read the following guide and apply…
Dacia Sandero (2012-2020 / B8) Before you begin, open the door of your Dacia Sandero. Start by prising off and removing the window switch, simply by extracting the internal retaini…
Dacia Sandero (2012-2020 / B8) In this new guide of ours, we will explain the various steps you need to follow if you intend to independently locate the OBD port inside your 2017 D…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos