Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the OBD2 Port on the 2017 Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

To locate the OBD2 port inside your Dacia Sandero (2017 model), it only takes a few seconds. All you need to do is read the following guide and apply what is described.

First, ensure that you have parked the car on a flat surface, then turn it off completely and move to the front passenger seat. At this point, open the glove compartment, remove any items inside, and locate the OBD2 port you were looking for. Once found, you can connect a diagnostic tool to it.


Posted on 7 May 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2008-2012 / BS) Knowing the location of the OBD2 port in your first generation Dacia Sandero is very important as it allows you to connect any diagnostic tool to it …
Dacia Sandero (2012-2020 / B8) If you own a second generation Dacia Sandero, particularly the 2017 model, you can use the following procedure to easily locate the OBD port of the v…
Dacia Sandero (2012-2020 / B8) Knowing the exact location of the OBD port on your Dacia Sandero is very important as it allows you to quickly connect a diagnostic tool if needed. I…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos