Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to remove the cabin air filter on Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Cabin air filter
Operation: How to remove the cabin air filter on Dacia Sandero

How to replace the cabin filter on a Dacia Sandero? Let's see how to do it: with a plastic lever we peel off the coating placed in the lower part of the dashboard (right side under the glove box). Let's get a screwdriver or a cordless drill and remove the fastening screws of the side tunnel lining. We extract the worn passenger compartment filter, insert a new passenger compartment filter making it adhere well around the walls of the box, reassemble the filter box cap and tighten the screws (we cover everything with the cloth placed under the dashboard). We check the correct assembly of the previously assembled pieces.


Posted on 10 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sandero 2008-2012 - Where is the cabin air filter located in the dacha Sandero Stepway? Read Answer
    • Sandero 2008-2012 - Where is the cabin filter on the Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos