Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Wiper That Doesn't Work on a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Windshield wipers

See other generations:
Video tutorial

The problem with this Dacia Sandero is that the wipers work intermittently: pressing or moving the lever sometimes unlocks them. The solution is that the wiper switch (the lever on the steering wheel) is faulty.

Therefore, the problem is not the motor, nor the fuses, nor the relay. The switch is easily replaced, and we can find it on Amazon with code B0FTLM9P67 at a price of £20.00 + £1.99 shipping.

Remove the two Torx T20 screws under the steering column, take off the upper and lower covers held by clips; disconnect the immobiliser behind the lever, then find the two Torx 15 screws that hold the switch: when it is free, disconnect and remove it. Place the new one in its place and reassemble everything.

It is a simple job as there is no need to remove the airbag or steering wheel.


Posted on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wipers on the Dacia Sandero StepWay
How to Replace the Wipers on the Dacia Sandero StepWay
Dacia Sandero (2012-2020 / B8) This video shows how to replace the wipers on the Dacia Sandero StepWay. The procedure is simple and takes little time to perform, and it does not re…
How to replace the front windshield wipers of the Dacia Sandero
How to replace the front windshield wipers of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …
How to Replace the Rear Wiper Blade on the Dacia Sandero?
How to Replace the Rear Wiper Blade on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To replace the rear wiper blade of the Dacia Sandero, lift the wiper arm connected to the motor. To remove the blade, lift the rubber, hold the blade…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos