Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil in a Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Transmission fluid

To change the gear oil in a Dacia Sandero, ensure the vehicle is on a flat surface and then safely lift it. Reach the bottom of the gearbox and locate the oil drain plug, placing a suitable container underneath. Unscrew the plug and allow the used lubricant to drain completely. Once drained, close the lower plug. Then, locate the side fill plug of the gearbox and insert the new transmission oil up to the correct level indicated by the manufacturer. Finally, close the fill plug, clean any residue, and check for leaks.

Posted on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Shift Knob on the Dacia Sandero Stepway?
How to Replace the Gear Shift Knob on the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) This video guide aims to explain and show how to change the gear shift knob, not only for the Dacia Sandero Stepway but also for other vehicles of th…
How to Replace the Gear Knob on a Dacia Sandero?
How to Replace the Gear Knob on a Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the gear knob on a Dacia Sandero, grasp the old knob so that it can be rotated counter-clockwise and removed from the end of the correspon…
Resetting the Oil Change Light on a Dacia Sandero
Resetting the Oil Change Light on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How do you reset the Dacia Sandero? Let's see how to reset the warning light on a Dacia Sandero. This operation is very simple; enter the vehicle, pu…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos