Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Dacia Jogger

Model: Dacia Jogger MK 1 - Years 2021-2026
Part: Service warning light

This tutorial shows the procedure to reset the maintenance light on a Dacia Jogger. To reset the service light, use the controls on the steering wheel; turn the ignition to ON without starting the engine. Using the directional buttons on the right side of the steering wheel, scroll through the display menu until you reach the Maintenance / Service section. When the indication of remaining kilometres or days appears, hold the OK button for about 10 seconds. The value will start to flash and then reset automatically. Turn off the ignition, wait a few seconds, and restart the vehicle to check that the light does not appear again. If the reset fails, electronic diagnosis may be required.

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Dacia Jogger?
How do you reset the tire pressure warning light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) It will be possible to reset the tire pressure warning light of the Dacia Jogger by inflating the tires until they reach the recommended pressure val…
How do you reset the Service light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) In order to reset the Service light of the Dacia Jogger, you need to turn on the instrument panel by turning the key inside the ignition switch. Once…
How do you reset the Service light on the Dacia Jogger?
How do you reset the Service light on the Dacia Jogger?
Dacia Jogger (2021-2026 / MK 1) It will be possible to completely make the Service light disappear from the Dacia Jogger instrument panel by first turning on the panel, inserting th…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos