Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuel Filter in a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Diesel fuel filter

See other generations:
Video tutorial

To change the fuel filter in a Dacia Sandero 2, turn off the engine, open the fuel cap, and safely lift the vehicle. Remove the front right wheel and detach the fastenings of the wheel arch lining to access the filter, located behind the wing.

Then, remove the metal protection by unscrewing the three fastenings, and position a container under the filter to collect the fuel. Disconnect the fuel lines by pressing the clips of the connectors and carefully sliding them off. Unscrew the fastenings of the bracket, extract the old filter, and install the new one, ensuring the flow direction indicated by the arrow is followed.

Reconnect all the hoses, secure the filter to the bracket, and refit the protection and wheel arch lining. After lowering the vehicle, turn the ignition on and off several times to activate the pump and fill the system.

Start the engine and check for leaks. The position and procedure may vary depending on the engine type.


Posted on 4 October 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2012-2020 / B8) The air filter for the Dacia Sandero 2 costs around £10, so by replacing it yourself instead of going to a garage, you can save significantly on labo…
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is likely time to replace the air filter. This guide will explain t…
Dacia Sandero (2012-2020 / B8) The instructions in this guide will allow you to open the fuel filler flap and cap of a Dacia Sandero, enabling you to refuel at the service station.…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos