Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Dacia Sandero 1

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

In this video tutorial, you will see the steps to disassemble and replace the windscreen washer pump on a first-generation Dacia Sandero. First, open and lift the bonnet of your car and remove the plastic grille located under the wiper arms, prying with something thin; then locate the washer pump and disconnect its electrical connector.

At this point, pull and extract the washer pump, disconnecting the fluid tube; simply replace it with the new one and reassemble everything!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located on a Dacia Sandero?
Where Are the Fuses Located on a Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) Any fuse in the Dacia Sandero is housed within one of the dedicated fuse boxes installed in the vehicle: this type of car typically has two. The firs…
Where are the fuses located in the Dacia Sandero?
Where are the fuses located in the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) The fuse boxes of the Dacia Sandero are responsible for containing the fuses that regulate the operation of the devices present on the vehicle: in th…
How to replace the front windshield wipers of the Dacia Sandero
How to replace the front windshield wipers of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos