Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to replace the ceiling light bulbs on dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Interior lights ceiling light bulb
Operation: How to replace the ceiling light bulbs on dacia Logan

Let's see how to replace the bulbs placed in the ceiling light of the roof panel of a Dacia Logan. Use a screwdriver to pry between the ceiling light cover and the perimeter of the same (without breaking the plastic); we separate the transparent slide. We take out the bulbs to be replaced from the ceiling light. We replace damaged bulbs with new ones (same size and voltage). We reassemble the plastic in its housing with attached parts. We carry out the same operation for the other ceiling lights placed in the roof panel. We test the correct functioning of the bulbs at the end of assembly.


Posted on 28 November 2023 by ScegliAuto



How to replace the taillight and the third brake light bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) Below we will see the procedure for disassembling and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First
How to change the rear light bulb on dacia Logan
Dacia Logan (2004-2012 / MK 1) Let's see how to replace the headlight bulbs on Dacia Logan. We raise the front hood. With a screwdriver we remove the plastic cap that covers the he
Replacing rear light bulbs on Dacia Logan
Dacia Logan (2012-2022 / MK 2) Changing the damaged rear light bulbs of a Dacia Logan? Let's see how they change. We lift the rear hood and put it in safety with the rod. We find t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos