Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : Dacia Sandero, Duster 1.5 dCi diesel filter replacement

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Diesel filter
Operation: Dacia Sandero, Duster 1.5 dCi diesel filter replacement

In this video tutorial we will see how to remove the diesel filter of a Dacia Sandero, but also of the sister SUV Duster. First of all we must know that to get to the filter it is not necessary to work from under the engine hood, but on the right side of the front wheel: in fact we lift the car and remove the wheel: then we go to remove the screws of the plastic fender and in the front we will find our diesel filter. To disassemble it, remove the filter nuts that tighten it and remove the protective iron casing: then disconnect the electrical connectors and remove the filter!


Posted on 14 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the Dacia Sandero diesel filter located? Read Answer
    • Sandero 2012-2020 - When to replace the diesel filter on the Dacia Sandero? Read Answer
    • Sandero 2008-2012 - Where is the diesel filter located on Dacia Sandero 1.5 dci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos