Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Dacia Sandero 1.5 DCI

Model: Dacia Sandero B8 - Years 2012-2020
Part: Timing belt

Follow the main instructions below to remove and replace the timing belt on the Dacia Sandero 1.5 DCI. First, raise the vehicle and remove the front right wheel; then remove the crankshaft pulley by undoing the central bolt, and subsequently remove the V-belt. At this point, remove the timing cover to access the belt, taking the necessary references for replacement; then install the original timing belt, following the video tutorial to the end!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Dacia Sandero 1.4
Replacement of the timing belt of the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today we will see the main instructions on how to disassemble and replace the timing belt of the Dacia Sandero 1.4. First, we open the car's engine h…
How to Replace the Timing Belt on the Dacia Sandero 1.4
How to Replace the Timing Belt on the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today's instructions will guide you through the steps to remove and replace the timing belt on the Dacia Sandero 1.4. First, open the bonnet and begi…
How to Replace the Timing Belt on a Dacia Sandero
How to Replace the Timing Belt on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the timing belt on a Dacia Sandero is a complex operation, so follow the instructions in our video tutorial carefully. Start by lifting the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos