Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the serpentine belt of the Dacia Sandero.

Model: Dacia Sandero BS - Years 2008-2012
Part: V-belt

In this guide, we will see the instructions that will allow us to disassemble and replace the trapezoidal belt of the Dacia Sandero. First of all, we lift the car and start by removing the front right wheel; then we loosen the tensioner to later remove the trapezoidal belt from the pulleys, as shown in the video. At this point, we install the new alternator belt, inserting it correctly between the various pulleys; we manually turn the engine to verify the correct insertion of the trapezoidal belt, following the video tutorial until the end!

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Dacia Sandero 1.4
Replacement of the timing belt of the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today we will see the main instructions on how to disassemble and replace the timing belt of the Dacia Sandero 1.4. First, we open the car's engine h…
Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Dacia Sandero (2012-2020 / B8) Follow the main instructions below to remove and replace the timing belt on the Dacia Sandero 1.5 DCI. First, raise the vehicle and remove the front …
How to Replace the Timing Belt on the Dacia Sandero 1.4
How to Replace the Timing Belt on the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today's instructions will guide you through the steps to remove and replace the timing belt on the Dacia Sandero 1.4. First, open the bonnet and begi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos