Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Dacia Sandero 1.4

Model: Dacia Sandero BS - Years 2008-2012
Part: Timing belt

Today we will see the main instructions on how to disassemble and replace the timing belt of the Dacia Sandero 1.4. First, we open the car's engine hood and start disassembling and removing the engine support on the distribution side, unscrewing the fixing screws; then we remove the cylinder head cover, unscrewing additional screws. At this point, we lift the car and remove the right front wheel, removing the fender and disconnecting the V-belt; we remove the crankshaft pulley and the distribution cover, replacing the belt with the new original one.

Posted on 4 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Replacing the Timing Belt on the Dacia Sandero 1.5 DCI
Dacia Sandero (2012-2020 / B8) Follow the main instructions below to remove and replace the timing belt on the Dacia Sandero 1.5 DCI. First, raise the vehicle and remove the front …
How to Replace the Timing Belt on the Dacia Sandero 1.4
How to Replace the Timing Belt on the Dacia Sandero 1.4
Dacia Sandero (2008-2012 / BS) Today's instructions will guide you through the steps to remove and replace the timing belt on the Dacia Sandero 1.4. First, open the bonnet and begi…
How to Replace the Timing Belt on a Dacia Sandero
How to Replace the Timing Belt on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the timing belt on a Dacia Sandero is a complex operation, so follow the instructions in our video tutorial carefully. Start by lifting the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos