Do it yourself
Frequently asked questions about cars and motorcycles

Oil and Oil Filter Replacement on Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Oil filter

Lift the bonnet and secure it with the prop rod. Raise the front right side of the car with a jack. Open the oil container in the bonnet and pull out the dipstick to check the level (both have a yellow cap). Move to the underside of the car: remove the cover at the engine level by unscrewing the bolts. Prepare a container and unscrew the bolt that acts as a cap for the drainage hole (see video). Collect the used oil in the container, refit the bolt, and unscrew the oil filter cover. Remove the filter, insert the new one, and replace the cover. Finally, add the new oil from the upper container.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2008-2012 / BS) Replace the engine oil on a Dacia Sandero? Replace oil and filter at the mileage indicated in the owner's manual. Lift the car with a jack to access …
Dacia Sandero (2012-2020 / B8) In today's video, learn how to replace the engine oil and oil filter, performing the regular maintenance service on the Dacia Sandero second series, …
Dacia Sandero (2008-2012 / BS) How to replace the engine oil filter on a Dacia Sandero? Follow these steps: lift the car with a column lift, unscrew the bolt from the oil sump and …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos