Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Oil and Filter on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Oil filter

How to replace the engine oil and filter on a Dacia Sandero? Open the car door and pull up the engine compartment release lever (located at the bottom left of the steering wheel) and lift the front bonnet; remove the engine oil filler cap. Raise the car on a column lift; unscrew the bolt of the oil sump and let the fluid drain into a container; using a socket wrench, unscrew the large tightening bolt of the container where the oil filter is located (remove the worn filter) and fit a new one. Finally, top up with new fluid and close the front bonnet.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2008-2012 / BS) How to replace the engine oil filter on a Dacia Sandero? Follow these steps: lift the car with a column lift, unscrew the bolt from the oil sump and …
Dacia Sandero (2008-2012 / BS) Replace the engine oil on a Dacia Sandero? Replace oil and filter at the mileage indicated in the owner's manual. Lift the car with a jack to access …
Dacia Sandero (2008-2012 / BS) Let’s see how to replace the oil filter on your Dacia Sandero. First, note that the oil filter is a crucial component of your car and is usually chan…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos