Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Brake Pads on Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

In today’s tutorial video, you will see step-by-step instructions to remove and replace the front brake pads on a second-generation Dacia Sandero. First, lift the vehicle at the front and start by removing the wheel; then unscrew the fastening screws of the brake caliper and the plastic clips, as illustrated in the video.

At this point, remove the caliper from the disc and take out the old brake pads, replacing them with the new ones; before refitting, clean off any carbon residue and push back the piston to facilitate insertion!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Replacing Brake Pads on Dacia Sandero
Replacing Brake Pads on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Replace the front brake pads on a Dacia Sandero. Lift the car on a column lift to the desired height. Remove the wheel using a telescopic spanner or …
How to Replace the Front Brake Pads on a Dacia Sandero
How to Replace the Front Brake Pads on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Below, you will discover the information that will allow you to remove and replace the front brake pads on a Dacia Sandero in simple steps. First, li…
How to Replace the Front Brake Pads on a Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front brake pads on a Dacia Sandero, lift the car using a jack so that the corresponding front wheel is not in contact with the ground…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos